| 1. | Safety |
2. |
Objectives/Overview |
3. |
Procedures |
| 4. | Observations |
5. |
Equipment |
| 6. | |
| 7. | Calculations/Set-ups |
| 8. | Conclusions |
| 9. | Grading Scale |
10. |
Review Prelab Questions |
| 11. | Review Postlab Questions |
Experiment
6
Molar Mass Determination by Titration
EQUIPMENT
The specific equipment used will depend on the procedures your group decides to use. The lists below are some probable and possible equipment you may use.
-
Balance (for weighing samples of primary standard and unknown)
-
50 mL Burette with clamp (for performing titration)
-
100 mL beaker and funnel (for filling burette)
-
250 mL Erlenmeyer flasks (for titrations)
-
Piece of white paper (to be placed under flask during titrations)
Possible additional equipment which may or may not be required:
-
Volumetric pipette(s) and rubber bulb
-
Florence flask with stopper
-
Beaker(s)
-
Graduated cylinder(s)
-
Volumetric flask(s)
